Different Types of Sump Pump Switches

Sump pump switches to control the flow of water from a sump pit or floor drain into a drainage system, such as a sewer. A sump pump switch is a safety device that connects to a sump pump and helps prevent it from operating when the connection between the pump and its outlet has been broken. When installed, a sump pump switch can either stop the pump, turn it off or start the pump. These types of switches can be manual, automatic, or contact. Some sump pump switches are installed at the top of a sump pit, while others are mounted on a wall or a floor.

Those who have never had to install a sump pump before may have a question about the type of switch that they should install for their sump pump system. In this blog post, we’re going to discuss “types of sump pump switches” or “sump pump float switch types”, how sump pump switches work, which ones to use, and why you might want to consider going with a smart sump pump switch over a traditional one.

What is a Sump Pump Float Switch?

A sump pump float switch is a device that will help you control the water level in the sump pit. A sump pump has a float switch that senses when the level of water is low. Once it senses this, it activates the pump and sucks the water out of the basin or drain. The sump pump is located in the lowest part of the basin or sink.

Sump pumps are used to prevent a basement from filling with water when there is a flood or other disaster. Sump pumps are also used to clean out drains and toilets when clogged up. They work by creating a vacuum force to pull the water down into the drain or toilet.

Different Types of Sump Pump Float Switches

Sump pumps come in many different types and designs. There are ones that are placed in the basement and ones that are placed on the ground. The sump pumps that are placed in the basement are more effective. They are better at collecting water than those that are placed on the ground.

Sump pump float switches were designed for use within home basements. A sump pit is a basin or container that collects any water that enters the home in the event of an unfortunate flooding situation.

There are different types of float switches for your sump pump, including:

  1. Vertical Action Float Switch
  2. Diaphragm Switch
  3. Tethered Float
  4. Electronic Switch
  5. Mechanical float switch

Vertical Action Float Switch

This is a safety feature for sump pumps that are controlled by a float switch. When it senses that the water level is low, it triggers the pump to stop pumping water. The sump pump is connected to a power source through a switch and an electrical cord.

A vertical action sump pump float switch is part of a sump pump’s control system. It ensures that the sump pump is switched on and off according to the water level in the sump pit. The sump pump’s float is used to detect the water level in the sump pit, and it is connected to the control board of the sump pump. When the water level rises above the top of the float, it triggers the sump pump to start working. When the water level drops below the bottom of the float, it stops the sump pump. You can get the float switch from any local hardware store.

Diaphragm Sump Pump Switch

Diaphragm sump pumps are designed to work with a diaphragm valve that sits at the bottom of your sump pit or basin. The valve allows water to move into the pump while preventing it from moving back, thus allowing the pump to operate properly. When the water reaches the top of the sump pit, the valve closes, and the water begins to drain out of the pit.

Diaphragm sump pumps are used to prevent water from entering your home’s foundation through the floor drains. These pumps are activated when the pressure inside the house rises above a certain point, and they stop when it falls below this point. In this way, the pumps operate as pressure switches. When they’re activated, they force water from the basement to the surface, so that you can have a visual indication of their operation.

Tethered Sump Pump Float Switch

Tethered Sump Pump Float Switch is a special switch used for sump pumps. This switch connects your main power source to the pump and also allows you to turn it on and off remotely.

Tethered Sump Pump Float Switch, also known as a float switch, is a type of switch that works by detecting changes in the water level in a tank or container. These switches have no moving parts, and hence are very reliable. The most common use of these switches is to trigger your sump pump in an emergency.

Electronic Sump Pump Switch

A sump pump switch is used to activate or deactivate a sump pump. It’s commonly used in combination with a sump pump and a sump pit. The pump runs only when it detects a water level drop or other critical situation. The switch is normally placed at the bottom of the sump pit and usually contains a float sensor.

Electronic Sump Pump Switch is a switch that allows you to turn off your sump pump automatically during off-peak hours, such as late night and early morning hours. This ensures that your sump pump does not work during these periods, and hence saves energy costs.

Mechanical Sump Pump Float Switch

A mechanical switch uses a simple lever mechanism to activate the switch when the water level reaches a certain point. The lever moves when the water rises, activating the switch and turning the sump pump on.


In the event of a flood, you have to be sure that the water won’t rise up. This can happen because of a broken pipe or if there is too much rain. If the water reaches your basement, then you have to get your sump pump working immediately. Sump pumps are important in case of floods. They are a very convenient way to drain water from your basement. They work by using the force of gravity to push the water out of the basement. The main thing is that the water must be drained quickly.

Leave a Comment

Your email address will not be published. Required fields are marked *