Backup Sump Pump with wifi Reviews, Buying Guide and Comparison Chart

A sump pump is a key part of your home and building’s plumbing system that keeps your basement dry. A sump pump is an automatic device that can be powered by electricity or by a solar panel. It is designed to discharge water from a house’s foundation, which can cause problems like flooding in the basement or the garage. The pump is connected to a drain pipe that leads to the sewer system and can work without power in case of a power outage.

There are also some sump pumps that you can get with built-in WiFi—so you can remotely monitor the pump’s performance and get notifications of any pump failure. This gives you the chance to get a new pump before flooding your basement or a warning if your old pump is starting to fail. So, which sump pump should you choose? Check out the list below for my top picks for this category:

Top 3 Inground Pool Pumps

Pool pumpKEY FEATURESDETAILS
XtremepowerUS 2HP In-Ground Swimming Pool Pump
XtremepowerUS Pool Pump
Flow Rate:5280 GPH
Max Head:66-ft.
Horsepower:2 HP
Material:Polymeric
Weight:38.2 lbs.
PriceDetail review
Hayward Power Flo Pool Pump
Hayward Pool Pump
Flow Rate:148 GPM
Max Head:-ft.
Horsepower:1.5 HP
Material:Corrosion-proof
Weight:24.1 lbs.
PriceDetail review
Harris ProForce 1 HP Inground Pool Pump
Harris ProForce Pool Pump
Flow Rate:52 GPM
Max Head:8-ft.
Horsepower:1 HP
Material:Stainless steel
Weight:35 lbs.
PriceDetail review
XtremepowerUS 1.5HP Inground Pool Pump
XtremepowerUS Pool Pump
Flow Rate:5280 GPH
Max Head:66-ft.
Horsepower:1.5 HP
Material:Polymeric
Weight:30.8 lbs.
PriceDetail review
Hayward Super Pump Pool Pump
Hayward Super Pool Pump
Flow Rate:4980 GPH
Max Head:10-ft.
Horsepower:1.5 HP
Material:Metal
Weight:38.5 lbs.
PriceDetail review
VIVOHOME Powerful Self Primming Dual Voltage in/Above Ground Pool Pump
VIVOHOME Self Priming
Flow Rate:6800 GPH
Max Head:55.7-ft.
Horsepower:2 HP
Material:PP + Stainless
Weight:15.42 lbs.
PriceDetail review

View all

3 Importance Reasons Having a Wifi Sump Pump

A sump pump can save your life when it fails and keep your basement dry when it rains. But if your sump pump is noisy, unreliable, or ineffective, you could end up wasting a lot more time and money than necessary. And there are ways to protect against this common problem, such as adding an automatic backup sump pump with wifi. Here are 3 reasons why having a backup sump pump with wifi is a smart move:

1. The backup sump pump with wifi is the right size for the job. They usually only weigh a few pounds, and they are so small that you don’t even notice that you’re using them.

2. It’s easy to install. All you have to do is plug the sump pump into an electrical socket. You don’t need to drill any holes in your concrete walls or floors.

3. It comes with a wireless connection. You can use it anywhere you want, so you don’t have to be around your sump pump to make sure that it works. If you want to learn more about backup sump pumps, read this blog post.

Wifi Enabled Sump Pump Reviews

This article will cover how to choose a sump pump for your basement. We will also talk about how to use wireless cameras to monitor your sump pump. We will also talk about how to install a sump pump. Lastly, we will talk about how to use an app to monitor your sump pump.

It’s tough to pick one product when you have many products from different brands making similar claims. So, we’ve done the hard work for you. Here are the best five Wifi enabled sump pumps on the market. After reading this review, making a decision will become easier for you.

So, let’s get started.

1.

Buyer Guide

Flow Rate

Flow rate is one of the most important factors to consider when buying a backup sump pump. The higher the flow rate, the faster the sump pump will drain the water out of your basement, and the better it will work.

You can also look at the size of the opening and the type of filter used in the pump. The larger the opening and the more porous the filter, the better it will drain water.

In general, a flow rate of at least 50 gallons per hour should be enough to keep your basement dry.

Water Outlet

The water outlet is an essential part of your sump pump. It should be able to handle the maximum flow that the sump pump can deliver, but it should also be easy to install.

The most common type of water outlet is a simple pipe, which has two flanges and screws through them to secure it into the sump pump’s outlet. But if you want a more robust design, then you can go for a threaded inlet. The advantage of a threaded inlet is that you can use different types of fittings or tubing, like flexible polyethylene (PE) tubing, which is more resistant to chemicals.

It’s important to keep in mind that the outlet on your sump pump needs to be properly installed since the force of the water flow could damage your home’s walls and foundations. You should make sure that the outlet is well supported and that the sump pump is set up in a way that minimizes the possibility of the outlet being damaged by the weight of water.

The outlet should be installed in such a way that it can be accessed easily when needed. The sump pump should also be installed on a level surface so that the outlet is at least a few feet below ground level. This will ensure that it is safe from damage.

Remote Notification

When choosing a backup sump pump with wifi, you should first determine whether you’ll be using it for a home or commercial property. Commercial property usually has a sump pump that can be accessed from the outside, whereas a residential one will only be accessible from the inside. If your pump is located inside your home, then it makes sense to go with a backup sump pump with wifi so that you can get a notification if your sump pump is activated.

If your sump pump is located in a crawl space or basement, then it may not have an outside access point. If this is the case, you can also purchase a backup sump pump with wifi that allows you to send an email, text message, or even call you if the sump pump activates. This will ensure that you’ll be notified in case of any emergency.

Automatic Protection

A backup sump pump is a must-have in every home. It’s used to prevent flooding and protect your property from water damage. But, the problem is that they are usually very expensive, and the installation process is not easy at all. And even after installing one, you still need to keep an eye on it to make sure it doesn’t fail at the most inconvenient times.

The good news is that these days there are some affordable backup sump pumps that are designed to be automatic. The best thing about these pumps is that they come with built-in protection features. You can install them in less than 20 minutes and then forget about them for the next three decades. They can be operated by mobile phones or tablets and can send alerts through internet-based monitoring software.

Power Source

If you’re planning to do any kind of construction on your home, whether it’s renovating or just making some additions, you’ll need a good backup sump pump. In the event of a power outage, this will ensure that the water in your basement won’t drain away and flood your house.

You may need more than one, depending on how big your home is and how much water your plumbing can handle.

For example, if you live in a three-bedroom house and have a large yard, you might only need one sump pump. But if your yard is quite small and you have an outdoor pond, then you might need two sump pumps.

Of course, it’s good to keep your home secure as well, so there are many other things that you should consider when choosing your backup sump pump.

Conclusion

You can now buy a WiFi-enabled water pump and controller from a leading manufacturer for about $200. That’s what you should expect from your water pump. The new pump has been available for about a year, so it may be a little more expensive than you’d like. But, it has been designed specifically for backup pumps and provides everything that you’ll need to take care of the backup pump. It comes pre-programmed with your local water levels and the amount of pressure needed for your home. The pump features a wireless module that connects to your wifi router and lets you turn the pump on remotely. It has the ability to be controlled from anywhere in the world using an app on your smartphone. And, it has the ability to detect leaks, alert you to any problems, and even help you pinpoint the location.

Leave a Comment

Your email address will not be published.